Installation Instructions

Step 1: Install base
Step 2: Install faucet
Insert base (C) into base ring (F)
on sink or countertop with
“FR↑NT” facing forward. Tighten
screws on base (C) with 4mm
hex wrench (E) until base is
secure on base ring (F) on sink
or countertop.
Insert hot & cold waterlines (D),
one by one, into large hole of base
(C). Align arrow on faucet body
(B) with arrow on base (C). Attach
faucet body (B) to base (C).
66
C
Half Moon Locking Nuts
F
B
D
C
Installer Tip: Rotate the two
half-moon shaped locking
nuts inward before inserting
base (C) into base ring (F) on
sink or countertop.
Installer Tip: Rotate the two
half-moon shaped locking
nuts inward before inserting
base (C) into base ring (F) on
sink or countertop.
Note: “ ” on base should be in
alignment with “ ” on faucet
body.