Installation Guide

Fig 1 Fig 2
Fig 3
Fig 4
C
a
b
1
C
a
b
1
C
a
b
C
a
b
1
1
a
b
Step 1a: Installing the easy install assembly
Shut off the water supply. Remove the
old faucet. Clean the mounting surface.
Check for the proper thickness of the
sink or countertop. Insert the base (a)
into the sink or countertop. If your
model does have a escutcheon, skip to
step 1 b.
NOTE: “Front” on the base (a) must
face the front of the sink or
countertop. The two mounting plates
(b)b) on the base (a) must be loose
movable during the installation of
the base (a).
Step 2: Installing the easy install assembly
Press the base (a) so that it can not move, then turn the screw with the provided hex
wrench (C, HEX: 6.0mm) clockwise, as shown in Fig 1. When the mounting plates (b)
make contact with the sink (1), continue to turn the screw with the provided hex
wrench (C, HEX: 6.0mm) clockwise, as shown in Fig 2, until the base (a) is completely
tightened and secured, as shown in Fig 4.
6