Installation Guide

7
Step 4: Flush faucet
Remove aerator (A).
Turn faucet on for 1
minute to ush any
debris. Reconnect
aerator (A)
C
C
B
E
C
D
D
A
A
D
F
Hot
Cold
Half Moon Locking Nuts
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Water will not shut off
completely
Cartridge (5) may
need to be adjusted or
replaced
Remove index button
(1A). Loosen set screw
(1B) with 2.5mm hex
wrench (12). Remove
metal handle (2).
Remove cartridge
cover (3) by hand only.
Remove locking nut
(4) with an adjustable
wrench. Remove ceramic
disc cartridge (5). Check
for cracks
Dripping from aerator Washer may be missing
or not seated correctly
Remove aerator (8).
Make sure washer is
present and seated
correctly