Installation Guide

Step 1: Installing the easy install assembly

Shut o the water supply. Remove the old

faucet. Clean the mounting surface. Check

for the proper thickness of the sink.

Insert the base (a) into sink.

NOTE: “Front” on the base (a) must face the

front of the sink. The two mounting plates (b)

on the base (a) must be loose and movable

during the installation of the base (a).

Step 2: Installing the easy install assembly

Fig 1 Fig 2

Press the base (a) so that it can not move, then turn the screw with the provided

hex wrench (C, HEX: 6.0mm) clockwise, as shown Fig 1. When the mounting

plates (b) make contact with the sink (1), continue to turn the screw with the

provided hex wrench (C, HEX: 6.0mm) clockwise, as shown Fig 2, until the

base (a) is completely tightened and secured, as shown Fig.4.

Fig 3

Fig 4