INSTALLATION GUIDE Oletto™ Single Handle Kitchen Bar Faucet KPF-2600 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list.
Faucet Dimension 7'' [178.7mm] 4 1/4'' 5 1/2'' [140.8mm] 7 1/4'' [184.9mm] [312.2mm] 12 1/4'' [109.1mm] 2'' [61.0mm] Max: 2 3/8'' [52.
Step 1: Installing the easy install assembly Shut off the water supply. Remove the old faucet. Clean the mounting surface. Check for the proper thickness of the sink. Insert the base (a) into sink. a b NOTE: “Front” on the base (a) must face the front of the sink. The two mounting plates (b) on the base (a) must be loose and movable during the installation of the base (a).
Step 3: Installing the faucet A D 1 a Insert the supply lines (1) through the hole of the base (a). Carefully insert the hoses into the base. Place the faucet assembly (A) onto the base (a) as shown in the above figure. Secure the faucet assembly (A) by tightening the set screw with the provided hex wrench (D, Hex: 2.5 mm).
Step 4: Connect waterlines to main valve Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON) NOTE: Please make sure filter washers are installed before connecting to the main valve. Step 5: Flush faucet 1 After installing faucet, remove aerator. Turn water on for 30 seconds to remove any debris. Reassemble aerator. Do not lose the gasket (1) in the aerator.
Replacement Parts Replacement Parts List Finish / Color 2 3 4 1 7 13 8 9 10 14 16 17 *Denotes faucet component color options: SFS - Spot Free Stainless Steel; CH - Polished Chrome; GR - Grey; BL - Black; MB - Matte Black; BB - Brushed Brass; SFACB - Spot Free Antique Champagne Bronze 7 1. Aerator Assembly CH, SFS, MB, BB, SFACB* KP27295 2. Washer GR, BL* KP27031 3. Block KP27030 4. O-ring KP27029 5. Index 5 6 11 12 15 Part # GR, BL* KP27222 6. Set Screw KP27033 7.
Troubleshooting If you have followed the instructions carefully and your faucet still does not work properly, take the following coorective steps: PROBLEM CAUSE Leakage under the handle Bonnet nut (8) has come loose 10 Hexagon Nut 9 11 12 ACTION Remove the cover button (12). Loosen set screw (11) with hex wrench (15). Remove the handle (10) and cap (9) . Tighten bonnet nut (8) with an adjustable wrench The aerator13is dirty or mis-fitted Remove the aerator and check for debris.
Codes/Standards Applicable: NSF/ANSI 372 LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1 1.5GPM 5.7L/min maximum TM Faucet Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
