Installation Guide

ManualsBrandsKRAUS ManualsBeverage FaucetsBritt Commercial 1-Handle Pull-Down Kitchen Faucet and Purita Water Filtration Faucet in Spot Free Stainless Steel

1

2

3

4

5

6

7

8

9

Table Of Contents

9

Step 7. Flush and check for leaks

Pull hose assembly out of spout

and remove spray head by

unscrewing from hose in a

counterclockwise direction.

Hold the end of the hose down

into the sink and turn the faucet on

to the warm position. Flush water

lines for one minute to flush away

any debris. Check for leaks.

Re-tighten any connections if

needed. Do not overtighten.

Reinstall spray head by hand

tightening it back onto the spray

hose. After installation is completed,

turn on the hot and cold water

supplies to check for leaks.