Installation Guide
This faucet ships with a 1.8 GPM ow
restrictor installed. An optional 2.2 GPM
ow restrictor is also included in the box.
To switch the ow rate of the faucet:
1. Disassemble the quick connect assembly
by separating the connector (1) and quick
connect (2).
2. Replace 1.8 GPM connector (blue) with
the 2.2 GPM connector.
3. Reinstall the quick connect assembly.
1
10
9
11
12
Step 7: Flow Regulator Replacement
8
279
10 31/32”
Minimum distance 90mm
Cold Wat
Max35
217
8 17/32”
Max1 3/8”
2
1
2
1
1
To activate the spray mode, simply
press the handle (1) located under
the spray head.
1
Step 6: Flush faucet
NOTE: In compliance with CEC standards, this faucet is designed with a 1.8 gpm
ow rate. At your discretion, you may modify the product with the included 2.2
gpm restrictor. Please note that doing so will remove the capability of this product
to meet specic low-ow standards. Kraus is not liable for any alterations made to
the product post-sale, and highly advises that you consult with your local or
statewide plumbing enforcement agency prior to any modication.