INSTALLATION GUIDE Stainless Steel Farmhouse Kitchen Sink KHF410-30 / KHF410-33 / KHF410-36 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Inspect the sink prior to installation to make sure the sink has not been damaged during shipping • Use the cut-out template provided by Kraus • Observe all plumbing and building codes according to your state requirement • Additional floor and wall preparation may be required to avoid damaging the product E • Make sure to purchase the correct cabinet for your farmhouse sink.
Parts List • Cut-Out Template • Bottom Grid • Drain • Drain Cap • Mounting hardware 438mm 27-7/8” 30-7/8” 29-7/8” 32-7/8” 708mm 527mm 17-1/4” 20-3/4” 527mm 438mm 20-3/4” 17-1/4” Dimensions 784mm 254mm 9” * KHF410-30 10” 254mm 10” 9” 229mm 835mm 229mm 759mm KHF410-33 32-7/8” x 20-3/4” x 10” Min Cabinet Size: 36” Matching Grid: KBG-410-33 Drain Model #: ST-1 Drain Cap: STC-2 527mm 438mm 20-3/4” 17-1/4” 29-7/8” x 20-3/4” x 10” Min Cabinet Size: 33” Matching Grid: KBG-410-30
DETERMINE REVEAL TYPE DETERMINE REVEAL TYPE 1.
3. Trace Template • Trace template on countertop with a pencil Step3 4.
Step4 5. Cut Cabinet Front • Measure height of apron front. Add 1/16” to the dimension when you mark base cabinet front cutout. Use jigsaw to cut Determine location for mounting brackets; space 6. Set up Mounting Brackets 1/2" (13mm) Silico ne Ad hesiv e • Turn countertop over and align sink with countertop.
Step5 7.
ep6 8.
9. Secure Sink to Countertop • Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop.
10. Attach Mounting Hardware Step9 • Attach mounting hardware to secure bowl.
11. Install Plumbing Fixtures • Connect drain to sink. Connect trap to drain.
Codes / Standards Applicable: Kitchen Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product.
Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
