Instructions / Assembly

12
Water will not shut off
completely
Cartridge (11 ) may be
defective
Remove cap (7) at
bottom of handle
(8). Loosen set screw
(6) with 2.5mm hex
wrench (23). Remove
the handle (8) and
unscrew cartridge cover
(9) by hand. Unscrew
locking nut (10) with
an adjustable wrench.
Remove ceramic disc
cartridge. Check for
cracks
Aerator (1) drips or has
inconsistent water
flow pattern
Aerator (1) is dirty or
not seated properly
Unscrew aerator (1)
by hand and clean out
debris
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under handle
(8)
Locking nut (10) has
come loose
Remove cap (7) at
bottom of handle
(8). Loosen set screw
(6) with 2.5mm hex
wrench (23). Remove
the handle (8) and
unscrew cartridge cover
(9) by hand. Tighten
locking nut (10) with an
adjustable wrench