Instructions / Assembly

9
Connect spray hose (H) to check
valve (J) and tighten with an
adjustable wrench.
9
Step 6
Hot
Water
Cold
Water
Installer Tip
F
E
G
F
Hexagon Nut
Hot
Water
Cold
Water
Close
Open
Left
Hot Water
Push
25˚
90˚
Step 5
KPF-1602.indd 9 2016-08-09 3:39 PM
A
J
Insert washer
Step 5
Step 6
Step 4
4. Connect the spray h
with a wrench until snug
hose (12). Connect h
and tighten with a wrench, then turn on water supplies and check
leaks.
Attach weight (F) to lowest point
vertically on spray hose (H)
Connect and tighten waterlines (G)
to angle stops. Turn on the angle
stops and check for leaks
(DO NOT TURN FAUCET ON)
Step 5
Step 6
Step 4
4. Connect the spray h
with a wrench until snug
hose (12). Connect h
and tighten with a wrench, then turn on water supplies and check
leaks.
Installer Tip
Remove aerator and turn faucet on
for 60 seconds to flush any debris
F
H
J
A
Step 5
Step 6