INSTALLATION GUIDE Single Lever Pull-Out Kitchen Mixer KPF-1622 www.kraususa.com I Toll Free: 1.800.775.0703 I ©2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
(168mm) 3/8” (10mm) (∅ 50mm) ∅ 1 3/4” (∅ 45mm) 3 3/4” (96mm) ∅ 1 15/16” (∅ 50mm) PRIOR TO INSTALLATION • 1 5/8” (42.5 mm Max) Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer 7/8” (22mm) 19.7 Service at 800-775-0703 for a replacement º • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
KPF-1622 Diagram and Parts List Diagram and Parts List Included Parts: Aerator 1A 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 12 J 2 14 3/4” 9 G E37 10 H I 11 4 5 6 7 8 4 5 6 7 8 9 10 9 1110 12 11 12 13 13 3 Aerator 1 1 D 4 5 E1 6 E2 A. Faucet Body B. Aerator Head C. Base D. Base O-Ring E.
9 -3/8” (239 mm) 5-3/8” (135 mm) 6 -7/8” (175 mm) 8 -1/4” (209 mm) 7” (179 mm) 12° 2 -5/8” (66 mm) 2 -1/8” (53 mm) 14 -7/8” (377 mm) Faucet Dimensions 360 ° 4
2 -5/8” (66 mm) 2 -1/8” (53 mm) 14 -7/8” (377 mm) Faucet Dimensions 5 360 °
Faucet Faucet InstallationMethods Procedures Faucet Installation Installation Methods Installation InstallationMethod Method11 Installation Method 1 The minimum distance between an the faucet hole and the wall hshould ssstthan The minimum distanceLebetween s The minimum distanceLebetween be 3.5” 3.5 nccee 3.5 a t diisstan d um m m i u n Miinim M the faucet hole and wall should the faucet hole and wall should be 3.5” be 3.
Installation Steps Step 5 Installation Step 1 Steps 1 Step Step 1 Step 1 F Remove mounting hardware assembly (E) Hexagon Nut E G 1 1 F A 8 ~Ø3 Ø35 38 ~Ø1 Ø35~Ø 1 Ø ~Ø1 Ø1 E1 Hot Water E2 E3 Step 2 Step 2 Step Step 6 2 Connect waterlines (G) to hot and Cold Water cold(9), copper lines on faucet 1. Remove mounting screws mounting nut (8), metal w 1. Remove mounting screws (9), mounting nut (8), metal w and rubber washer (6) from the faucet body (1). and rubber washer (6) from the faucet body (1).
5 Step 3 Step 6 7 8 A Insert faucet body (A) into hole on deck or sink with base 9 (C) and base o-ring (D) attached. Attach mounting hardware assembly (E) C 2. Insert the faucet body (1) into the hole on the deck D (4) and base o-ring (5), and then install the rubber metal washer (7), mounting nut (8) and mounting E1 underneath the sink. E2 Step 3 E3 Step 4 Step 4 Adjust cet body (1) into the hole on the deck with thefaucet basebody (A).
Step 4Step 5 Water Water StepStep 4Step 6 55 Step A Connect spray hose (H) to check valve (J) and tighten with an adjustable wrench. 4. Connect the spray 4. Connect thea spray h unti with wrench with a wrench until snug Close 25˚ 90˚ Push and tighten with a and tighten with a wrench, leaks.leaks. J Hot Water Hot Water hose (12). Connect hose (12). Connect h Insert washer Left Open 9 Installer Tip Cold Water Step66 Step Step 6 KPF-1602.
Usage Usage How to Operate the Handle How to operate the handle: 25˚ Close 25˚ Close Open Open 1. Pull the lever to the right to 1. lever turn onPull the the water. Pushto to the the right to turn left to on turnthe off water. Push to the left to turn off 2. Pull the lever forward to increase hot water flow and Pullleverthe 2.
Replacement Parts 1. Aerator Assembly 2. Hose 3. Aerator Head 4. Set Screw 3 5. Cap 2 22 6. Set Screw 1c 1b 1a 4 8 11 6 7 10 9 14. Rubber & Metal Washer 15. Mounting Nut 18. Weight 19. Check Valves 20. Connector 18 21 13. Base O-Ring 17. Protective Sleeve 13 24 14 16 17 12. Base 16. Mounting Screw 15 20 9. Cartridge Cover 11. Cartridge 23 19 8. Handle 10. Locking Nut 5 12 7. Cap 21. Washer 22. Hot & Cold Waterlines 23. Hex Wrenches 2mm & 2.5mm 24.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under handle (8) Locking nut (10) has come loose Remove cap (7) at bottom of handle (8). Loosen set screw (6) with 2.5mm hex wrench (23). Remove the handle (8) and unscrew cartridge cover (9) by hand.
Codes/Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75gpm 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
