Instructions / Assembly

12
Water will not shut off
completely
Cartridge may be
defective
Unscrew the lever (12)
on the handle (14) by
hand. Loosen set screw
(13) with a hex wrench
(2.5 mm). Remove
the handle (14) and
unscrew cartridge cover
(15) by hand. Unscrew
the locking nut (16) with
an adjustable wrench.
Remove ceramic disc
cartridge (17). Check for
cracks
Leaking between hose
(3) and faucet body or
sprayer (1)
Hose (3) may be loose
or washers are not
seated correctly in the
hose connections
Tighten the hexagon
nut with a wrench and
make sure the washers
are seated correctly
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under the
handle (14)
Locking nut (16) has
come loose
Unscrew the lever (12)
on the handle (14) by
hand. Loosen set screw
(13) with a hex wrench
(2.5 mm). Remove
the handle (14) and
unscrew cartridge cover
(15) by hand. Tighten
locking nut (16) with an
adjustable wrench
Aerator (11) drips or
has inconsistent water
flow pattern
Aerator (11) is dirty or
not seated properly
Unscrew aerator (11)
by hand and clean out
debris