INSTALLATION GUIDE Single Lever Pull-Out Kitchen Faucet KPF-1602 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
(168mm) 3/8” (10mm) (∅ 50mm) ∅ 1 3/4” (∅ 45mm) 3 3/4” (96mm) ∅ 1 15/16” (∅ 50mm) 1 5/8” Prior to Installation (42.5 mm Max) • Make sure you have all necessary parts by checking the diagram and parts 7/8” list. If any part is missing or (22mm) damaged, please contact Kraus Customer 19.7 Service at 800-775-0703 for a replacement º • ∅ 1 15/16” (∅ 50mm) • ∅ 1 3/4” (∅ 45mm) Turn off the hot and cold water supply at the angle stops and turn on the old10faucet to release any built up pressure.
Diagramand andParts PartsList List Diagram G F E H I A J B C D1 D2 D3 D4 D5 FaucetBody Body A.A.Faucet Base B.B.Base BaseO-Ring O-Ring C.C.Base MountingHardware HardwareAssembly Assembly D.D.Mounting D1 Plastic Washer – Optional D1. Plastic Washer – Optional (TopMount MountSinks SinksOnly) Only) (Top D2Rubber RubberWasher Washer D2. D3. D3Metal MetalWasher Washer 33 D4Mounting MountingNut Nut D4. D5Mounting MountingScrews Screws D5. SprayHead Head E.E.Spray SprayHose Hose F.F.Spray Spring G.G.
8-1/2" 8-1/2” 217mm (217mm) Max1-3/8” Max1-3/8” Max35mm Max35mm 1111” 5/16” (288mm) (279mm) Faucet Dimensions Ø1 3/8 (Ø35mm Hot Water Hot Water Cold Water Cold Water 4
Max1-3/8” Max35mm 32-1/8” 32-1/8” 815mm (815mm) Faucet Dimensions 7-5/8” 7-5/8” (194mm) (194mm) Ø1(Ø1 3/8~Ø1 1/2” 3/8”-Ø1 1/2”) (Ø35mm-Ø38mm) (Ø35mm~Ø38mm) Cold Water 5
Faucet Installation Procedures Faucet Installation Procedures Faucet Installation Procedures 815 32 3/32” 815 32 3/32” Installation Method Installation Method11 Installation Method 1 m 0m e9 c n istamm mcde 90 5” u 194 n m i ta ~3. Mmindis 7 ” 5 194 5/8” imu ~3. Min 7 5/8” s Les t 5” ~3. The minimum distance between Ø35~Ø38 The minimum the faucetdistance hole andbetween the wall should Ø1 3/8”~Ø1 1/2” Ø35~Ø38 the faucet should be 3.5”hole and the wall Ø1 3/8”~Ø1 1/2” be 3.
Step 1 Step 1 Remove mounting hardware assembly (D) Ø35~Ø38 Ø1 3/8”~Ø1 1/2” Ø35~Ø38 Ø1 3/8”~Ø1 1/2” D1 D2 D3 D1 4 D4 D2 D5D3 6 8 D4 D5 Step 2 A A Insert faucet body (A) into hole on deck or sink with base (B) and base o-ring (C) attached.
Step 3 Step 3 23 23 4 6 8 4 6 8 10 Adjust faucet body. 10 Secure mounting hardware (D) with wrench and Phillips head screwdriver 5 5 7 7 D D Step 44 Step Step 4 F F G H I A G Attach sprayer holder (H) to faucet body (A). Hand-tighten thumb screws (I).
Step Step 5 55 Secure spray hose (F) to faucet body (A). Insert spring (G) into sprayer holder (H). Connect spray head (E) to spray hose (F) FF EE Hexagon Nut Nut Hexagon G G FFH A A Hot Hot Water Water Step 6 Step Step 6 6 Connect and tighten waterlines (J) to angle stops.
Usage Usage How Howto tooperate operatethe thehandle: handle: Usage Hot Cold How toClose operate the handle: Water Water 25˚ 90˚ Hot Cold Close Water Water Left 90˚ 25˚Open Hot Water 1. Pull to to thethe right to turn 1. Pullthe thelever lever right to on the water. Push to the left to turn on the water. Push to the left to turn offPush 1. 2. 2. 2. Sprayer: Open Left Hot Water 1. Sprayer: Sprayer: 1. 1. Push Pull the right to turn Pull the the lever lever to forward to increase on the water.
Replacement Parts 1. Sprayer 4 2. Check Valve 5 3. Hose 4. Spring End Cap 6 3 5. Set Screw 6. Spring 2 7. Plastic Sleeve 8. Spray Holder 1 9. Thumb Screws 9 7 10. Plastic Cover 10 8 11. Aerator Assembly 12. Lever 13. Set Screw 14. Handle 11a 11b 11c 15. Cartridge Cover 16. Locking Nut 17 18 19 20 21 22 23 24 16 15 12 13 14 17. Cartridge 18. Base 19. Base O-ring 20. Rubber Washer 21. Metal Washer 25a 25b 22. Spacer 23. Mounting Nut 24. Mounting Screw 25.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the handle (14) Locking nut (16) has come loose Unscrew the lever (12) on the handle (14) by hand. Loosen set screw (13) with a hex wrench (2.5 mm). Remove the handle (14) and unscrew cartridge cover (15) by hand.
Codes / Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75gpm 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.
