R INSTALLATION MANUAL Ripiano Series Undermount Kitchen Sinks TM KGUW1-30 / KGUW1-33 KGUW2-30 / KGUW2-33 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2020 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product: STOP DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available and retain a copy of your receipt with purchase date for reference.
Prior to Installation: · Make sure that you have all necessary parts by checking the parts list.
Tools you will need Safety Goggles Drill Silicone Adhesive Jig Saw Hammer Phillips Screwdriver Tape Measure Pencil Masking Tape Hole Saw NOTE: Specialized tools may be necessary to install Kraus Granite Kitchen sinks with countertop materials other than wood, marble or granite.
Hardware (Included) Kit for Undermount Installation Important · Instructions may vary depending on countertop material. Read all instructions carefully, and ensure that counters are compatible with sink installation before proceeding. · Follow the plumber’s code and builder’s code effective in your area. · Shut off water valves prior to installation. · Open sink packaging and verify that the sink is in perfect condition. Put sink back into packaging to protect it until time of installation.
3/8" R5/8" (160.5mm) (407mm) 1" 10" (25.4mm) 1" 3 5/8" R1" (24mm) (93.7mm) (93.7mm) (239mm) (726mm) 9 3/8" 3/8" 1/2" 28 5/8" 3 5/8" R1" (24mm) Model #: KGUW2-30 Sink Dimensions: 29” x 19” x 10” Min Cabinet Size: 33” (254.78mm) (407mm) (482mm) 19" 17" 16" 10" (254.78mm) (239mm) 9 3/8" (8mm) 3/8" 1" (25.4mm) 30" (762mm) 32" (812.8mm) (25.4mm) (13mm) 1" (25.4mm) (737mm) 1/2" 5 7/8" (148.9mm) 1" (686mm) (13mm) (431mm) (407mm) (431mm) (482mm) 19" 17" 16" 5" (25.
Step 1.
Step 2. Position Template · · Check the cut-out template against the actual sink to ensure a proper sized cut-out. Place the cut-out template in the desired location on the countertop. NOTE: Make sure clearance is suitable for backsplash, faucet and plumbing for the sink.
Step 3. Trace Template · Trace template on countertop with a pencil.
Step 4. Cut Countertop · Cut the opening in the countertop by carefully following the traced line. NOTE: Please use the appropriate saw that best fits your countertop material.
Step 5. Set up Mounting Brackets • • Turn countertop over and align sink with countertop. Decide location for mounting brackets around the frame at a distance of about 1/4” (6.4mm) from the edge. Mounting holes should be 1/4" from the edge of the sink. 1/4" (6.4mm) Step 6. Drill Hole in Countertop • Use 15/64" drill bit to drill the fixation holes at a depth of 3/8” in the indicated location.
Step 7. Install Anchors • Add adhesive (optional) in the holes and then insert anchors into drilled holes and lightly tap with a hammer until flush. Step 8. Secure Sink to Countertop · Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the cutout in the countertop. Place sink over cutout hole and press firmly.
Step 9. Attach Mounting Hardware • • Attach mounting hardware to secure bowl. Remove excess sealant from inside lip. Allow sealant to set for 30 - 60 minutes. NOTE: Use rubbing alcohol to remove any excess sealant. SEALANT BRASS INSERT SUPPORT METAL SCREW Step 10. Install Plumbing Fixtures · · · Connect drain to sink. Connect trap to drain. Connect water supply connections to faucet according to manufacturer’s instructions. Run water into sink and check for leaks.
Codes/Standards Applicable UP C C R Kitchen Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. ("Kraus"). Kraus extends this warranty to the original purchaser for personal household use of the "Kitchen Sink" in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product.
If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an Authorized Partner please contact a Partner Support Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration R www.kraususa.
