Installation Sheet
Table Of Contents
12
6. Install Drain
· Insert the metal strainer into the rubber seal, and then into the drain hole.
· Insert the rubber gasket and the main drain body underneath the sink.
· Using the screw, tighten the main drain body and the metal strainer into place.
· Insert the basket on top of the drain installation.
7. Install Pipes
· Install the faucet following the manufacturer's instructions.
· Make proper water and waste pipe connections.
· Note: Before installation, please check that the drain kit complies with ASME A112.18.2/CSA B125.2
and with CUPC certification.
BASKET
SCREW
METAL STRAINER
RUBBER SEAL
RUBBER GASKET
MAIN BODY