Installation Guide

10
5. Install Sink
· Clean and dry the surface around the opening of the sink.
· Verify that the sink fits correctly in the opening. The edge of the sink must sit on the counter.
· Turn the unit upside down to apply sealant. Apply silicone-based sealant (not included)
underneath the edge of the sink.
· Ensure that the plastic flap holding the screw underneath the sink is partially opened, as shown.
· Insert the sink into the opening.
· Fix the sink to the counter by swiveling the mounting brackets, as shown.
· Tighten the screws in the front of the sink, followed by the ones in the back and on the sides of
the sink.
· Remove excess silicone-based sealant.
SILICONE
BASED SEALANT
SINK
COUNTER
SINK