Installation Guide
16
5. Install Drain
• Insert the metal strainer into the rubber seal, and then into the drain
hole
• Install the rubber gasket and the main drain body underneath the sink
• Using the screw, tighten the main drain body and the metal strainer into
place
• Install the basket on top of the drain installation
Installation Manual
5. Drains installation
· Insert the metal strainer into the rubber seal, and then into the
straining hole.
· Install the rubber gasket and the main drain body underneath the
sink.
· Using the screw, tighten the main drain body and the metal strainer
into pl
ace.
· Install the basket on top of the drain installation.
· Repeat the some procedure for the Installation of the second
draining hole.
Note : Plumber putty is not required for the installation of these
drains.
Rubber gasket
Main body
BASKET
SCREW
METAL STRAINER
RUBBER SEAL
RUBBER GASKET
MAIN BODY