Installation Guide

Step 1. Install the faucet assembly
Step 2. Secure the faucet assembly
Before installation, ensure that the
flange (D) is placed on the bottom
of the new faucet assembly (B).
Insert the faucet body and all hoses
through the hole in the sink.
1. Install the pull down hose with
connector first.
2. Install the hot and cold inlet
hoses.
3. Install the supply hose.
Install the plastic washer and metal
washer (C1) onto the threaded
mounting shank. Thread the nut
(C2) onto the mounting shank.
Lock the nut (C2) into position by
tightening the screws (C3).
Do not overtighten.
B
D
C1
C2
C3
6
B
NOTE: If the stainless steel sink
is thinner than 5mm you MUST
use the plastic stabilizing base (J).
J
Optional
(see note)
1
3
2