Installation Guide

ManualsBrandsKRAUS ManualsFiltered Water FaucetsBolden Single-Handle , Pull-Down Sprayer Kitchen Faucet Water Filtration System in Spot Free Stainless Steel

1

2

3

4

5

6

7

8

9

Weight

here

Weight

h

e

re

H

G

Step 3: Installing the counterweight

Install the weight clip (H) at the point of

the hose marking "weight here". Insert the

weight (G) onto the weight clip (H) by

sliding it down onto the weight clip (H).

b

NOTE: 3/8’’ typical connection attached.

1/4’’ connector / reducer included in the

box for A-typical connections.

Step 4: Connect waterlines to main valve

Attach waterlines to angle stops and

tighten until snug. Turn on angle stops and

check for leaks (DO NOT TURN FAUCET

ON).

NOTE: Please make sure filter washers

are installed before connecting to the

main valve.

Connect the filter inlet pipe (b) into the

end

of the filtration manifold (not included). Pull

moderately to ensure the connection has

been made.

7