INSTALLATION GUIDE Elavo™ White Ceramic Large Rectangular Undermount Bathroom Sink w/ Overflow KCU-251 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure that you have all necessary parts by checking the parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
I Tools you will need: Hex wrench Safety Goggles Drill Phillips Screwdriver Putty Knife Silicone Sealant Silicone Adhesive Jig Saw Adjustable wrench Phillips screwdriver Tape Measure Pencil Tools You Will Need I Phillips scre Silicone Sealant J J Adjustable wrench Scissors Screwdriver NOTE: Specialized tools may be necessary to install Kraus Ceramic Undermount sinks with countertop materials other than wood, marble, or granite D Parts List (Included) • Cut-Out Template 4 • Mounting Ha
375mm Dimensions 23.26”L x 16.25”W x 8.1”H 7” 23.2 mm 591 16.26” 413mm 8.11” 206mm Ø1.
1. Cut paper template Clip Location Rim of Lavatory Cut Along This Line 12.9” (328mm) • Use scissors to cut along the inside line of the paper template 19.9” (506mm) 2.
Step3 11.61” (295mm) Rim of Lavatory Cut Along This Line 17.7” (450mm) 3.
4. Install anchors • Flip countertop over and place on a foam pad for protection. Use cutout template to mark the anchor placement on the countertop. Drill 5/16” diameter x 3/8” deep hole in countertop • Place epoxy in the drilled hole.
Rim of Lavatory Cut Along This Line 14.25” (362mm) Clip Location 5. Install sink 14.25” (362mm) • Use a bead of clear silicone (or preferred adhesive) around the rim of the sink. Check the alignment of the sink to the opening in the countertop. Place sink over cutout hole and press firmly • Attach mounting hardware to secure bowl. Remove excess sealant from inside lip • Allow sealant to set for 30 – 60 minutes NOTE: Use acetone or rubbing alcohol to remove any excess sealant 6.
Codes/Standards Applicable: Ceramic Bathroom Sink Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Ceramic Sink” in its original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Ceramic Sink) to be free from defects in material and workmanship under normal usage for the lifetime of the product.
Commercial Warranty Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded. No additional warranties, express or implied are given, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
