Manualshelf

Installation Guide

ManualsBrandsKRAUS ManualsKitchenLoften Center All-in-One Dual Mount Stainless Steel 33 in. 2-Hole Single Bowl Kitchen Sink with Pull Down Faucet
12345678910
3
Make sure to check off that you have all of the following items
Prior to Installation:
· Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or
damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
· Turn off the cold and hot water at the angle stops and turn on the old faucet to release and built up pressure
· Flush angle stops to release any debris prior to installation
· Pre-drilled hole size requirement: 1 3/8" (min) - 1 1/2" (max)
· Max countertop thickness: 1 3/4"
Kitchen Sink - KHT400-33
Kitchen Faucet - KPF-1610SS
Cut-Out Template
Undermounting Hardware
Top Mount Hardware
Bottom Grid - KBG-T400-33
Drain - ST-1