Installation Guide

Diagram and Parts List

1. Spray Head

2. Faucet Body

3. Mounting Hardware

A. Rubber Washer

B. Metal Washer

C. Mounting Nut

D. Mounting Screws

4. Supply Hose

5. Hot & Cold Waterlines

6. Hose

7. Washer

8. Weight

9. Hex Wrench

10. Washer (2.2GPM)

Please note: This faucet is designed with a 1.8 gpm flow rate in compliance with CEC standards. To adjust the flow rate to 2.2

gpm, replace the washer (7) with the 2.2 gpm washer provided in package. Work with your local jurisdiction to make sure you

are in compliance prior to and modification. All modifications are done so at the end users discretion, Kraus is not liable for

any indiscretions that may occur which lead to non-compliance.