INSTALLATION GUIDE Single Lever Pull-Out Kitchen Faucet KPF-1612 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep teh box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
(168mm) 3/8” (10mm) (∅ 50mm) ∅ 1 3/4” (∅ 45mm) 3 3/4” (96mm) ∅ 1 15/16” (∅ 50mm) PRIOR TO INSTALLATION • 1 5/8” (42.5 mm Max) Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer 7/8” (22mm) 19.7 Service at 800-775-0703 for a replacement º • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
KPF-1612 Diagram and Parts List Diagram and Parts List 10 G Included Parts: 1. 2. 3. 4. 5. 6. 7. 11 8. 9. 9F 11 H 8 E 10 1 A 11 10. Spring 11. Spring Holder 12 12. Hot and Cold Waterlines (2) 13. Supply Hose15 9 10 Faucet Body Base O-Ring Rubber Washer Metal Washer Fixing Nut Fixing Screw (2) Weight Spray Head Spray Hose 15 Ø1 3/ 12 I 13 9 12 13 1 J 13 2B 3 C1 5 C3 1 14 Tools you will need: 4 C2 6 C4 Wrench Phillips Screwdriver D7 2 3 4 2 5 A. Faucet Body 6 D. Weight 3 4 B.
8”8” (203mm) 203mm Faucet Dimensions 8-1/2” 8-1/2” 217mm 215mm Ø1-3/8”~ Ø1-1/2“ Ø1-3/8”~Ø1-1/2” Ø35mm~Ø 38mm Ø35mm~Ø38mm Hot Water Hot Water Cold Cold Water Water 4
Max1-3/8” Max1-3/8” Max35mm Max35mm 21-1/4” 21-1/4” (540mm) 540mm Faucet Dimensions 5
56 6 7 7 u dis nim um Miim Min Hot Hot Water Water Cold Cold Water Water 540 540 21 1/4” 21 1/4” 8 15/32” 8 15/32” Ø35~Ø38 ” 3.5 ce.5” Ø1 3/8~Ø1 1/2” nØ35~Ø38 a t 3 is 3/8~Ø1 e c d Ø1 1/2” n m ta Max35 MaxMax35 1 3/8” Max 1 3/8” Faucet InstallationProcedure Procedures Faucet Installation 13 Faucet Installation Procedure 13 Installation InstallationMethod Method11 Installation Method 1 Off Off 2 The minimum distance ” between the hole and The minimum 3.5 faucetbetween ndistance hashouldbe 5” .
90˚ 90˚ 25˚ 25˚ Step Step111 ff Off On On Left Left Hot HotWater Water Right Right Cold ColdWater Water Remove Removemounting mountingscrews screws(6), (6), mounting hardware assembly mounting nut mounting(C) nut(5), (5),metal metalwasher washer (4), (4),and andrubber rubberwasher washer(3) (3)from from the thefaucet faucetbody body(1) (1) A11 Ø35~Ø38 Ø35~Ø38 Ø1 Ø13/8~Ø1 3/8~Ø11/2” 1/2” Step 2 Step Step22 22 33 C1 44 C2 C3 55 C4 66 1A1 2B2 faucet body (A) into hole Insert body (1) Insertthe thef
Step 3 Step 3 1 1 2 2 5 C 5 3 43 54 65 6 After the direction Adjustadjusting faucet body.
Hot Water Cold Water Step 5 Step 6 Step 5 Connect and tighten waterlines (I) to angle stops.
Replacement Parts 5 4 3 6 2 1 23 7 8 26a 26b 14 13 12 25 24 22 15 16 17 18 19 20 21 9 10 11 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM 11 CAUSE ACTION Leakage under the handle (11) Locking nut (13) has come loose Unscrew the lever (9) on the handle (11) by hand. Loosen set screw (10) with a hex wrench (2.5 mm). Remove the handle (11) and unscrew cartridge cover (12) by hand.
Codes/Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75gpm 6.6L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
