I N S TA L L AT I O N MA N UA L Oletto™ Single Lever Pull Out Kitchen Faucet KPF-2610 www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
7/8” (22mm) 19.7 º Prior to Installation: • 10 1/8” 8 5/16” (257mm) (21mm) Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800- ∅ 1 15/16” (∅ 50mm) 775-0703 for a replacement 1 3/8” (35mm) ∅ 1 3/4” • Turn off the hot and cold water supply at the angle stops and turn on the old (∅ 45mm) faucet to release any built up pressure. Remove existing faucet.
Diagram and Parts List Tools You Wil Adjustable w B A Silicone Se J F C I D G H E A. Spray Head G. Hot & Cold Waterlines B. Faucet Body H. Weight C. Deck & Putty Plate I. Quick Connect D. Base J. Hex Wrench Set E. Spray Hose J1. 2mm F. Supply Hose J2. 2.5mm J3.
9º 1/16”~1-1/2” max (1mm~38.1mm) max 1/16”~1” max (1mm~25.4mm) max 7-3/8 (187mm) 9-3/4” (247mm) 10-1/2” (266mm) 10-3/8” (262mm) 8-1/8" (207mm) Ø2" (Ø50mm) 5/16” (8.5mm) 9º 1/16”~1-1/2” max (1mm~38.1mm) max 1/16”~1” max (1mm~25.
1A Step 1A: Install base without deck & putty plate 1B Insert base (D) into sink or countertop with “FR↑NT” facing forward. Tighten screws on base C (D) with 4mm hex wrench (J) until base is secure on sink or 1 countertop D Installer Tip: Rotate the two half-moon shaped locking nuts inward before inserting base (D) into sink or countertop Half Moon Locking Nuts 1B B D 2 J 1 D Place a bead of clear silicone sealant (not included) around the edge of the putty plate (C).
1/16” (1mm) min. 1” (25.4 mm) max. Ø 1-3/8” (35 mm) min. Ø 1-1/2” (38 mm) max. Step 2: Install faucet Half Moon Loc 2 1A G D E Rubber Caps G G F G 3 Insert spray hose (E) into small hole of base (D).
Half Moon Loc Half Moon Locking Nuts 2 4 Step 4: Connect waterlines to main valve Thread hot & cold waterlines (G) onto angle stops. Tighten with adjustable wrench until snug.
Half Moon Locking Nuts 4 Step6: Install weight 6 G Attach weight (H) on the designated mark on the spray hose (E) E A G G Cold Designated Mark Hot H A E Step 7: Flush faucet E A A 7 Remove spray head (A). Hold tip of spray hose (E). Turn faucet on for 1 minute to flush any debris.
Replacement Part List 1 2 3 1. Metal Assembly Handle 2. Cartridge Cover 4 3. Locking Nut 4. Cartridge 5. Set Screw 8 6. Base 7. Cover & Putty Plate 8. Spray Head 9. Quick Connect 10. Spray Hose 10 9 11. Weight 5 12. Hex Wrench 2.5mm 13. Hex Wrench 2mm 12 11 etal Handle Assembly 9 im Cap cking Nut eramic Disc Cartridge 14.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the handle Locking nut (3) has come loose Unscrew joystick from handle (1). Loosen set screw with a hex wrench (13). Remove metal handle (1). Unscrew cartridge cover (2) by hand only.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM 11 CAUSE ACTION Hose does not retract Weight (11) may be installed incorrectly Readjust weight (11) on the hose (10). Make sure it is installed on the designated mark on the hose (11) Low Flow Quick Connect (9) may be clogged with debris Remove Quick Connect (9) from hoses.
Push Open Left Hot Water Care & Maintenance *To keep the product clean & shining, follow the steps below: 1. 2. 3. 4. Rinse with clean water & dry with a soft cloth Do not clean with soaps, acid, polish, abrasives, or harsh cleaners Do not use cloth with a coarse surface Unscrew the aerator and clean when necessary *This installation manual is subject to change without further notice. Download the Kraus Care & Maintenance Guide at: http://www.kraususa.
Codes/Standards Applicable: GREEN LEAD FREE IA P NSF/ANSI Standard 61 certified by IAPMO NSF/ANSI Standard 372 certified by IAPMO MO Meets ASME A112.18.1M/A112.18.1 R& T 1.75GPM 6.6L/min maximum TM Water Efficiency HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc.
www.kraususa.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.
