Installation Guide

11
PROBLEM CAUSE ACTION
Leaking between spray
head and hose
Spray head (1A) may be
loose or washer (2) may
not be seated correctly
in the hose connection
Tighten spray head (1A)
by hand until snug.
Make sure washer (2) is
seated correctly
Low flow Check valve connector
(5) may be clogged
with debris
Loosen set screw (6).
Remove spray hose
& spring (3). Unscrew
check valve connector
(5) located at the
bottom of spray hose
& spring (3). Soak in
50/50 solution of warm
water and vinegar for 5
minutes. Reinstall check
valve connector (5) and
spray hose & spring (3)