Installation Guide

Step 3
Step 4
Thread the cap (A) and the nut & washer (B) fully
onto body, with the slotted vents (1) facing the
wall. Tighten the nut (D) rmly.
Note: The air gap is to be installed so that the
ood level mark (F/L) shall be at or above the
ood level of the sink or other receptacle which
may be connected to the sanitary drain into
which the air gap discharges.
Connect the dishwasher outlet hose
(5/8 '' I.D.) (1) to air gap inlet (smaller diameter
leg) (2) and to dishwasher outlet (3) using
hose clamps (4). Connect the drain hose
(7/8 '' I.D.) (5) to air gap outlet (larger
dimension leg) (6) and to "Y" tting (7) or
disposer (8) using hose clamps. (1, 3, 4, 5, 7, 8
are not included).
(F/L)
A & B
D
1
OR
1
3
4
4
4
2
5
6
8
4
4
7