INSTALLATION GUIDE Visio Single Lever Vessel Faucet FVS-1810 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
Prior to Installation: • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800775-0703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet. Clean sink or countertop to remove any debris, plumber’s putty, or silicone • Place bucket under angle stops.
Replacement Parts 1B 1A 11 1. (A) Cover Button (B) Set Screw 2 2. Metal Handle 3 3. Cartridge Cover 4 4. Locking Nut 5. Cartridge 5 6. Faucet Body 7. (A) Base Trim Ring 6 (B) Base O-ring 8. Mounting Hardware 9A 9B (A) Rubber 10 and Metal Washer 7A 7B (B) Mounting Nut (C) Mounting Screws 9. (A) Rubber Washer 12 (B)Aerator 10. Aerator Cover 8A 8B 8C 3 11. Hex Wrench 12.
Faucet Installation Procedure 4
Step 1 Step 2 Step 1: Remove mounting hardware 7A 7B Remove the mounting screws (8C), mounting nut (8B), rubber washer, and metal washer (8A) from the mounting pipe. Keep the base trim ring (7A) and base O-ring (7B) on the base of the faucet 8A 8B 8C S Step 2 Step 2: Install hot & cold waterlines Step4 Place faucet on a soft cloth, spout facing up. Screw the hot and cold waterlines into the copper inlets at the base of the faucet.
Step 3 Step 3: Install faucet 8A 8B 8C Install faucet through 1-3/8” predrilled hole in countertop with base trim ring (7A) and base O-ring (7B) attached. Attach rubber washer and metal washer (8A), mounting nut (8B), and mounting screws (8C) on the threaded mounting pipe. Tighten mounting nut (8B) until snug.
Step 4: Connect waterlines to main valve Step4 Connect flex water supply lines to angle stops and tighten with adjustable wrench. Turn on both hot and cold main valve 8A Apply pipe tape (optional) 8B 8C Step 5: Flush faucet Step5 9A 9B 10 7 After installing faucet, remove aerator cover (10), aerator (9B), and rubber washer (9A). Turn water on for 30 seconds to remove debris.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE Leakage under the handle Locking nut (4) has come loose 10 Hexagon Nut 9 11 1 12 23 13 Aerator (9B) may be dirty or not seated properly Unscrew aerator cover (10) (by hand), remove aerator (9B) and rubber Cold washer (9A),Hot and clean Water Water out debris Water will not shut off completely Cartridge may need to be adjusted or replac
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency FAUCET WARRANTY Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non-transferable.
merchantability and fitness for a particular purpose, or compliance with any code. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included. COMMERCIAL WARRANTY Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use. All incidental or consequential damages are specifically excluded.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.com/registration www.kraususa.
