Installation Guide

8
Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under the
handle
Locking nut (5) has
come loose
Remove cover button
(3). Loosen set screw (2)
with hex wrench (17).
Remove metal handle
(1). Unscrew cartridge
cover (4) (by hand only).
Tighten locking nut (5)
with adjustable wrench
Aerator drips or has
inconsistent water flow
pattern
Aerator (8) may be dirty
or not seated properly
Unscrew aerator cover
(9) with adjustable
wrench. Remove
aerator (8) and clean
out debris
Water will not shut off
completely
Cartridge (6) may
need to be adjusted or
replaced
Remove cover button
(3). Loosen set screw (2)
with hex wrench (17).
Remove metal handle
(1). Unscrew cartridge
cover (4) (by hand
only). Unscrew locking
nut (5) with adjustable
wrench. Remove
ceramic disc cartridge
(6). Check for cracks