I N S TA L L AT I O N MA N UA L Coda Single Lever Vessel Faucet FVS-13800 www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV.
Thank you for your purchase We would like to take this opportunity to thank you for choosing Kraus. We hope that you are completely satisfied with your purchase, and enjoy it for years to come. If you have any questions, or require technical assistance, please contact us at 800.775.0703 and one of our representatives will be happy to help. For more information about Kraus products, please visit: www.kraususa.
7/8” (22mm) 19.7 º 10 1/8” (257mm) 8 5/16” (21mm) ∅ 1 15/16” (∅ 50mm) 1 3/8” (35mm) ∅ 1 3/4” (∅ 45mm) Prior to Installation: ∅ 1 15/16” (∅ 50mm) • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-7750703 for a replacement • Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
FVS-13800 Diagram and Parts List I A. Faucet Body B. Base O-Ring C. Rubber Washer H1 H2 H3 D. Metal Washer E. Mounting Nut F. Mounting Screws G. Hot & Cold Waterlines H. Aerator Assembly A H1. Aerator Washer B G H2. Aerator H3. Aerator Cover I.
Faucet Dimensions 267 10 1/2” 136 5 3/8” 235 9 1/4” 337 13 1/4” 15º Max35 Max1 3/8” ∅48 ∅1 7/8” ∅33~∅35 ∅1 5/16”~∅1 3/8” 4
Step1: Install mounting hardware and waterlines A A B B C G D E F Remove mounting nut (E) with mounting screws (F) attached. Remove metal washer (D), and rubber washer (C) from threaded mounting pipe. Place faucet body (A) on a soft cloth, spout facing up. Secure the hot & cold waterlines (G) at the base of the faucet (HAND-TIGHTEN ONLY) A. Hot Side: Left B.
Step 3: Secure faucet A A B After B adjusting direction of faucet body (A), tighten mounting nut (E) with adjustable wrench until snug. Secure mounting nut (E) by tightening mounting screws (F) C a Phillips head screwdriver with G E F D E F G Step 4: Connect waterlines to faucet and main valve Thread hot & cold waterlines (G) onto angle stops and tighten with adjustable wrench until snug.
Step 5: Flush faucet Remove aerator assembly (H). Loosen aerator cover (H3) with adjustable wrench. Remove aerator (H2) and aerator washer (H1). Turn water on for 1 minute to remove any debris. Reassemble aerator assembly (H) H1 H2 H3 Replacement Part List - FVS-13800 3 2 4 1 5 6 7 17 8 9 10 15 11 12 13 14 7 16 1. Metal Handle 2. Set Screw 3. Cover Button 4. Cartridge Cover 5. Locking Nut 6. Cartridge 7. Aerator Washer 8. Aerator 9. Aerator Cover 10. Base O-Ring 11. Rubber Washer 12.
Trouble - Shooting If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps: PROBLEM CAUSE ACTION Leakage under the handle Locking nut (5) has come loose Remove cover button (3). Loosen set screw (2) with hex wrench (17). Remove metal handle (1). Unscrew cartridge cover (4) (by hand only).
Codes/Standards Applicable: NSF/ANSI 372 GREEN LEAD FREE IA P MO R& T NSF/ANSI 61 ASME A112.18.1M 1.2GPM 4.5L/min maximum TM Water Efficiency HELP LINE Our customer service hours are Monday – Friday, 9am – 8pm EST. Be sure to visit our website at www.kraususa.com If you are a homeowner please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.
Push Open 2 Left Hot Water 3 Care & Maintenance *To keep the product clean & shining, follow the steps below: 1. 2. 3. 4. Rinse with clean water & dry with a soft cloth Do not clean with soaps, acid, polish, abrasives, or harsh cleaners Do not use cloth with a coarse surface Unscrew the aerator and clean when necessary *This installation manual is subject to change without further notice. Download the Kraus Care & Maintenance Guide at: http://www.kraususa.
R E G I S T E R Y O U R P R O D U C T T O D AY Receive Proof of Ownership Access Customer Care & Installation Help Get Exclusive Kraus Offers & Promotions Scan to Register Online or visit http://www.kraususa.com/registration We’re always looking for ways to improve. Please take a moment to share your experience. Visit http://www.kraususa.com/review to let us know what you think about your new Kraus product. Contact Us to Learn More 1.800.775.0703 / www.kraususa.com / customerservice@kraususa.
