Instructions / Assembly

8
Using the mounting template, mount
the filter head. Align the mounting
holes of the filter head at the proper
mounting location. Mark the hole
locations with a permanent marker.
Place the filter head aside and
pre-drill the mounting holes, if
necessary, depending on the
fasteners selected. Partially thread
the fasteners into the cabinet wall
and slide the filter head over the
fasteners. Secure the filter head by
tightening the fasteners.
NOTE: This system is designed for
vertical installation. Make sure that
the bottom of the filter cartridge will
be at least 2" from the bottom of the
cabinet.
Fasteners
Screws
Step 3.
! CAUTION - To avoid the risk of personal
injury, wear safety glasses and cut resistant
gloves with non-slip grip when drilling.
wall
Position drill holes
as indicated
7.87"(200mm)
Cabinet
Top
Cabinet
Wall
Cabinet
Wall
Cabinet Base
wall
MOUNTING TEMPLATE