Instructions / Assembly

Step 2.

Step 1.

Turn off the cold water supply and

turn on the faucet to relieve the

water pressure and drain water from

the water line. Disconnect the cold

water supply line from the cold water

supply valve. Install the tee adapter

to the cold water supply valve.

NOTE: Make sure to check for

washer in the Tee Adapter before

connecting to the angle stop.

Tee Adapter

3/8" Cold

Water Supply

Using a flathead screwdriver push the 4 tabs in on the back of the manifold to remove the

covers. Once pushed in, lift up and the covers will slide off.

Tab