Instructions / Assembly

Step 5.

Connect the tubing. Wet one end of the tubing sections with water and press it firmly into

the inlet port of the filter head. Wet the other end of the tubing and press it firmly into the

tee adapter. Repeat for the other end of tubing, pressing one end into the outlet port of

the filter head and the other end into the filtered water faucet supply.

IMPORTANT: Use the quick connect lock tabs to prevent any accidental tube release.

Connect the filter water faucet inlet to the filtered water faucet supply. If you have a

regular kitchen faucet, connect it to the top of the tee. Place the covers onto the filter

head. You may secure the tubing to the cabinet wall using clamps and hardware (not

provided).

IMPORTANT: Water from the supply line must be connected to the filter head inlet. Water

from the filter head outlet must be connected to the faucet. System performance and filter

capacity will be compromised if connected incorrectly.

NOTE: 8 feet of tubing is provided. When cutting the tubing use a sharp utility knife to

make clean and square cuts. Cut the tubing to the lengths needed between the faucet and

filtration system and the filtration system and water supply.

Covers

Inlet

Port

Outlet

Port

Tee

Adapter

Regular Kitchen

Faucet Supply

3/8" Cold

Water Supply

Filtered Water

Faucet Supply

Tubing

Quick Connect

Lock Tab

Filter Heads

! CAUTION - To avoid the risk of personal injury, wear cut resistant gloves with non-slip

grip when cutting.