Specifications

주 백 조 씽 크
Details of Countertop & Faucet Landing
4”
4 1/2”
3 1/8”
1/4”
1/4”
5/8”
5/8”
2 5/8”
Wall
Wall
3/4” Allowance For Backsplash
3/4” Allowance For Backsplash
SPECIFICATION SHEET
KD1US17B Specication
Kraus USA Model KD1US17B is a single bowl undermount kitchen sink manufactured from 16 gauge 18/10 antibacterial stainless steel.
Product has a brush nished bowl bottom and satin nished bowl sides. Sink rim is satin nish, with mirror nish bowl radius opening.
Sink includes NoiseDefend
™
undercoating and rubber sound dampening pads.
• Model KD1US17B bowl bottom has embossed Kraus waterways to channel water directly to drain.
Drain is located rear center of the sink bowl.
• Waste tting, undermount installation clips, and silicone oven mitt are also included.
• Model KD1US17B is a big sink, with bowl dimensions: 17”FB x 15 1/8”LR x 9”DP
• Recommended minimum cabinet size is 24”FB x 21”LR
• Model KD1US17B includes Kraus USA Lifetime Limited Warranty.
REV. August 16, 2017
Kraus USA Customer Service
Tel: [phone]
Email: [e-mail]
COUNTERTOP CUT-OUT OPTIONS
THE BIG SINK
Kraus Dex
™
Model KD1US17B
SIDE VIEW DETAILS OF COUNTERTOP & FAUCET LANDING
주 백 조 씽 크
25 1/2” Countertop
24” Cabinet Outside
*Dimensions May Be Adjusted At Discretion Of Fabricator
Side View Installation
Wall
Sink Cut-Out 17 1/2”
Sink Bowl 17”
Sink Rim 18 3/4”
3 1/2” ~ 4”
1 1/2”
4” ~ 4 1/2”
Center Line
Center Line
UnderMount Template
Template US - 1
May 2017
Silicone Caulk
(Not Furnished)
Sink
Mounting
Bracket
Fastener
(Not Furnished)
Countertop
Overhang
Countertop
Sink
Fastener
(Not Furnished)
Countertop
Mounting
Bracket
Silicone Caulk
(Not Furnished)
16 7/8” (429mm)
15 1/8” (385mm)
R1 1/2” (R40mm)
SPECIFICATION A: 1/4” REVEAL
SPECIFICATION B: 1/8” OVERHANG
Center Line
Center Line
UnderMount Template
Template US - 1
May 2017
Silicone Caulk
(Not Furnished)
Sink
Mounting
Bracket
Fastener
(Not Furnished)
Countertop
Overhang
Countertop
Sink
Fastener
(Not Furnished)
Countertop
Mounting
Bracket
Silicone Caulk
(Not Furnished)
16 7/8” (429mm)
15 1/8” (385mm)
R1 1/2” (R40mm)
SPECIFICATION A: 1/4” REVEAL
SPECIFICATION B: 1/8” OVERHANG
SINK INSTALLATION