Sink Installation Sheet

• Place sink in desired location on countertop and mark drain hole and

faucet hole centerline with a pencil

2. Drill Countertop

• Cut the drain opening in the countertop by carefully placing the 4”

hole saw on the area marked by pencil

2”

2 1/2”

3. Apply Silicone

• Check the alignment of the sink to the opening in the countertop. Use a

bead of clear silicone (or preferred adhesive) around the underside of the sink

Clip Location

Rim of Lavatory

Cut Along This Line

11.61” (295mm)

17.7” (450mm)

Model No. KCU-251

Allow a minimum of 4.5” (114.3mm)

from wall for faucet placement

clearance before cutting

NOTE: When plotting template

full size: Make sure horizontal

and vertical dimensions match

the dimensions labeled in the

template

12.9” (328mm)

19.9” (506mm)

Clip Location

Rim of Lavatory

Cut Along This Line