o0 ® groin o Product Description and Measurements Glass Vessel Sink and Waterfall Faucet Combo * Exclusive Klaus Collection * Waterfall Faucet * Glass Thickness: 12mm-19mm * Diameter: For Above Counter Installation In Accordance with Industry Odes & Standards for USA & Canada K@ All Klaus Glass Lavatory Sinks are Certified & Listed By nl.chJ Thank You 4 Dear Valued Customer, N Klaus would like to take this opportunity to thank you for this purchase.
Rough-In Dimension: PLEASE NOTE: Selected Tempered Glass Products and Collections are handcrafted. As a result sight variations In size and shape are to be expected. We recommend not cutting any surfaces based on the sizes and dimensions provided until the product is received. Sauerkraut shall not be held accountable for any custom Installation Issues.
1| Installation Instructions =l Tempered Glass Vessel Prepare the counter top by drilling a 1% diameter drain hole at the desired location. Prepare the counter top by drilling a 1% diameter faucet hole: Place the vessel on counter top as shown below. N Vessel Sink Counter Top = Pop Up Drain & Mounting Ring Installation (ONLY IF INCLUDED) STEP POP.LUP.DRAIN TOP N THIN SOFT RUBBER WASHER POP UP DARN e ‘White Rubber Washer @ concave WASHER TA\L PIPE @ FIRM WA&HER Contact us toll-fees at 1-800-775-0703; or vis
Axi TALL — STEP 3 STEP 3 Glass Vessel Sink and Waterfall Faucet Combo er-Le, 30 o Faucet Diagram P\ TN (1T Klaus is a leading designer and manufacturer of a broad:selection of unique bathroom fixtures and accessories, including vessel! sinks, faucets; showers, vanities and bathroom accessories.
Axi TALL = Glass Sink Installation N STEP 1. Make sure the vessel sink is not scratched, chipped or broken prior to installation: STEP 2. Check to see if your set contains the following parts: Vessel sink Pop up drain {optional, may be sold separately) Mounting Ring {optional, may be sold separately) STEP 3. Locate and place the mounting ring over the drain hole with the rubber side facing down ‘and'the white washer side facing up. STEP 4. Gently set your sink on top of the mounting ring. STEP 5.
