Datasheet

Approbations
Specification Marking
IEC 60947-3; EN 60947-3; VDE 0660 Teil107
ᐥ
UL 60947-4-1; CSA C22.2 No. 60947-4-1
ᐔ
CSA C.22.2 No.14
ᐑ
GB/T14048.3
ᐗ
Power loss per pole
Power (W)
1,40
Conditions during transport and storing
Minimum temperature (°C) Maximum temperature (°C) additional requirements
-40 85 In case of temperatures below -5°C no shock load permissible
Shock / Vibration
Type of oscillation Values
Resistance to shock min. 5g, 30ms
Resistance to vibration IEC 61373 (1999) Category 1, Class B
General Information
Text
Do not lubricate or treat contacts.-
Switches may only be mounted, connected and set into operation by qualified persons according to the accepted rules of technology.-
Use copper wire only. Do not coat the wire end with tin.-
Terminals with factory fitted jumper links are tightened during production. Take care during installation to ensure factory fitted links are not lost by undoing both sides of linked terminals. After
wiring, all terminal screws must be tightened to recommended torque specifications.
-
After installation of the switches the spacings between the terminals must be sufficient to fulfill the requirement of the applicable standards.-
Operating temperature
Min. Temperature [°C] Max. Temperature [°C]
-25 60
Datasheet CH10
06.15.2023 04:31 AM v3.5 https://www.krausnaimer.com Page 3 of
3