Datasheet

5
How to order
Special programs for escutcheon plate and handle combinations
-000 = without escutcheon plate, without handle
- .01 = without escutcheon plate
- .02 = without handle
- .03 = with square escutcheon plate without lettering
- .04 = with rectangular escutcheon plate without lettering
- .05 = with square escutcheon plate without lettering and
without handle
- .06 = with rectangular escutcheon plate without lettering
and without handle
- .07 = standard escutcheon plate, without lettering
on rectangular section
- .08 = with F-handle
- .09 = with P-handle
- .10 = escutcheon plate with frame and fixation ring only
(if using switches with single hole mounting: - .16)
- .11 = without escutcheon plate, but with handle
bearing plate
- .12 = with yellow escutcheon plate backing and
red handle
- .14 = with B-handle
- .16 = escutcheon plate with frame and fixation ring only
if using switches with single hole mounting
Example: The complete coding for switch type CG8 with a 3 pole ON/OFF switch function with electro-gray escutcheon plate
frame, square escutcheon plate without lettering, brushed aluminum plate backing and electro-gray handle reads as follows:
CH10 A202-103 E.
Handles, Escutcheon Plates and Optional Extras
The handles for standard switches shown on pages 6-23 are suitable for mounting units with four hole mounting. Alternative
types of handles available are illustrated on pages 24-29.
When a handle, escutcheon plate or optional extra is required but not covered by the dash number, the code number for the
selected component should be entered separately. A comprehensive range of available standard escutcheon plates is illustrated
on pages 30-32. Non-standard or special escutcheon plate engravings are available at extra cost. The large number of optional
extras and enclosures is covered in Catalog 101.
Switch Size
CG, CH and CHR switches are available in sizes S00, S0 and S1. These size codes indicate the dimension of the mounting,
the escutcheon plate and the handle, as well as the size of optional devices and enclosures. Page 3 lists these sizes and the
various switch types they include.
Ordering of Special Switches and Escutcheon Plates
When ordering special switches and escutcheon
plates it is advisable to use our order form, as
illustrated. The customer’s requirements are
shown in blue as an example.
For technical reasons, it may not be possible to
follow the sequence of contacts requested by
the customer. The final contact development
which is sent with every switch will show the
customer’s original terminal markings.
Order forms are available on request.
0
330
300
270
240
210
180
150
120
90
60
30
117 9531 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
ESCUTCHEON PLATE
POSITIONS
:
HANDLE
: :
MOUNTING OPTIONAL EXTRAS
: :
FIRM
DATE
: :
SIGNED
:
SWITCH- TYPE ESCUTCHEON PLATE
Modification of Switches
The standard switch consists of a plexi glass escutcheon plate with brushed aluminum backing and black inscription. The
escutcheon plate frame is black as well as the handle. Page 4 shows further color combinations of escutcheon plate and handle
which are available. The appropriate dash number must be substituted in the switch function coding to specify other color
combinations as required.
Example: The complete coding for switch type CG8 with a 3 pole ON/OFF switch function, electro-gray handle and electro-gray
escutcheon plate frame with brushed aluminum backing and black inscription which reads 0-1 is as follows: CH10 A202-100 E.
The following is a list of special programs for escutcheon plate and handle combinations. They may be obtained by specifying
any one of the following two (2) digit dash numbers as a part of the overall dash number. It is still necessary to prefix these two
digit numbers with the first digit which represents the color combination desired.
CH16
1234579
x
G251
VE M004
MOTOR 1
O
H
A
O
H
A
RKS
x
x
xx
x
xx
x
xx