User`s manual

www.kraun.it11
User’s Manual
3.7 Statistics
Click the tab Statistics as shown in Figure 3 12 to view the traffic statistics
about the connection. Click the Reset to refresh the information.
Figure 3 14
3.8 Wi-Fi Protect Setup
Click the tab Wi-Fi Protected Setup as shown in Figure 3 15, select different
way to configure the adapter for Wi-Fi network.
Figure 3 15
-> Note:
The Wi-Fi Protected Setup function takes effect only when the adapter and
the AP (the adapter wants to connect) must support the Wi-Fi function
first. Or else, the adapter can’t connect the AP.
3.8.1 PIN
Step 1: Select the PIN (shown in Figure 3 15).
Step 2: Click the Refresh button, and then the searched AP will display
in the screen (shown in Figure 3 16). Select the AP name as you need,
and click Select button.
Figure 3 16
Step 3: After that, the PIN Code displays on the screen (shown in Fig-
ure 3 17). Now, you should enter the pin code into your AP.
Figure 3 17
Step 4: Finally, the adapter will create the profile and connect to the
AP automatically; You can see the status screen as follow. This is a
new connection for Wi-Fi network.
Figure 3 18
ed