User`s manual
30
Manual
www.kraun.com
3.16. Safe Mode
If by some abnormal operation, for example, powered o during the critical point of the upgrade procedure,
the IP Camera will enter into the safe mode. In this mode, you will see the following “Safe mode” page when
login into this IP Camera. Please do the upgrade operation immediately to recover the system. On this safe
mode, the IP Camera can not display the video on the KraunView software, but you can still nd this IP
Camera on the “Auto search” list.
The steps to recover from “safe mode” are the followings :
1. Use KraunView to locate the IP Camera by clicking the “Auto Search” item on the KraunView software.
2. Login into the web conguration page of the IP Camera.
3. Upgrade the rmware from the “Upgrade” page.
Figure 3-23: Safe mode information page