manual

4 www.kraun.it
Quick Guide
6. HARDWARE INSTALLATION
Due to the hot-plug feature of the ExpressCard, the
installationofthiscardquitestraightforward.Pleaseinsert
the Combo ExpressCard into your portable system or
Notebook ExpressCard 34/54 wide slot. (Please note the
direction of the ExpressCard should match the direction of
the slot)
7. DRIVER INSTALLATION
OncetheWindows2000/XP/VISTAstartup,ComboExpresscardwillbeinstalledautomatically
without driver installing. Please update your operation system to Windows 2000 service pack
4,WindowsXPservicepack2andWindowsVISTAlaterversion.
8. HARDWARE VERIFY
Click on the “Device Manager” tab in System Properties, which you access from the Windows
Control Panel. You should see an entry for the driver you installed under the IEEE 1394 Bus ost
Controllers, Universal Serial Bus Controllers, and System devices items. (The device name will
be different in product what you bought)
Start > Controller Panel > System > Device Manager
NOTE:
Unpluggingorejectingadeviceswithoutrststoppingthemcanoftencauseyourcomputer
tocrashandlosevaluabledata.TosafelyunplugorejectanyoftheIEEE1394orUSBdevices,
rstlyusetheicononthetaskbartoquicklyunplugorejectyourdevices.
9. TROUBLESHOOTING
IF THE CARD AND DEVICES CONNECTED TO THE COMPUTER DO NOT SEEM TO BE
WORKING PROPERLY, PLEASE PERFORM FOLLOWING BASIC TROUBLESHOOTING STEPS:
1. Check that all cables are correct and securely connected.
2. Make sure the devices are turned on.
3. Makesurethedevicesaregettingthepowertheyrequire.
4. If a powered repeater Is connected, make sure It Is turned on.