Product Manual

High

pressure

connection

Heating chamber

Water inlet

Detergent

1 Float valve, water inlet

2 Water tank

3 Control valve, detergent

4 High pressure pump

with integrated unloader valve

5 Pressure switch Motor Start/Stop

Pipeline plan

6 Pressure switch Burner release

7 Safety valve for heating coile

8 Flow controller

9 Fuel pump with solenoid valve

10 Fuel filter

11 Fuel tank

Safety valve, number

5 must be set approx.

15 % higher than the

unloader valve on the

HP pump

Warranty

This warranty covers material and/or workmanship related defects only and does not

extend to ordinary wear.

Machine must be operated according to enclosed operating instructions which are

part of present warranty conditions.

All products sold directly to private customers are warrantied for a period of 24

months, whereas the warranty period for industrial purchases is limited to 12

months.

In case of any warranty claims, please have your HP cleaner together with

accessories and your purchase document ready and contact your nearest dealer or

authorized service point which can also be looked up in the internet at

www.kraenzle.com .

Warranty is void in case of attempts to modify any of the safety devices or in the event

of exceeding temperature or rpm limits - this also applies to undervoltage, low water

and/or polluted water. Gauge, nozzle, valves, sealing gaskets, high pressure hose

and spray equipment are considered wear parts and do not fall under this warranty.