Product Manual

Small repairs - do it yourself

Proceeding:

Switch o the high pressure cleaner and

pull plug from socket. Stop water supply.

Unscrew pump outlet.

There is no guarantee if the high pressure pump is damaged by

defective O-rings due to air induction or lack of water (cavitation).

Remove check body and check O-Ring for

soiling or damage. Also check seal seat in-

side pump housing for soiling or damage.

If sealing rings are defective replace

O-rings at once.

Problem

After closing the safety trigger gun the high pressure cleaner

keeps switching on and o.

The stainless steel pressure gauge continuously displays full pressure.

Possible cause No. 2

The non-return valve is defective.