Product Manual

22
Putting into operation
10. If using a water inlet filter check it
for cleanliness prior to each startup.
Manually unscrew filter bowl, remove
sieve and thoroughly rinse and clean
with the rest of the parts in clear
water.
11. Connect the water hose to water
inlet sieve. The high pressure cleaner
may be connected to a water mains
(1-10 bar pre-pressure) with either cold
or hot water (up to 60 °C).
The WS-series provides the opportunity
of sucking in water out of a container
(see direct suction).
Check the water inlet sieve for damage. Do not operate the
high pressure cleaner without or with a damaged filter.
Be careful when using hot water!
When running your high pressure cleaner with hot water of 60 °C raised
temperatures occur. Do not touch the metal parts of the high pressure
cleaner without safety gloves!
12. Each time check oil level at the oil
dipstick prior to putting the high
pressure cleaner into operation. Oil
level must reach until the upper edge
of marking "OK“.