Manual

7
Range of application
Thismachinemayonlybeusedforcleaningfacades,vehicles,containers,pavement
slabs,stables,machinesandsmilarobjects.
Inspections
Themachinemustbeinspectedaccordingtothe“GuidelinesforLiquidSprayDevices”
atleastonceevery12monthsbyaqualifiedperson,toensurethatcontinuedsafe
operationisguaranteed.Theresultsoftheinspectionaretoberecordedinwriting.This
maybedoneinanyform.Forinspectionreportsseepages54-55.
High-pressure cleaners used for commercial purposes have to be
checked by a qualified person at least every 12 months!
Accident prevention
Themachineisdesignedforaccidentstobeimpossible(ifusedaccordingtothese
instructions).Pleasereadsafetynotesincludedintheseinstructionscarefullybefore
usingthemachineandactcorrespondingly.Operatingstaffhastobeinstructedaccor-
dingtothismanual.The“GuidelinesforLiquidSprayDevices”mustbecompliedwith.
Setting up - Location
Neither set up and operate the machine in rooms where there is a risk of
fire or explosion nor put it into puddles. Do not use the machine under
water.
During the combustion process air is needed and exhaust gas emerges. If
the machine is operated in a confined space, precautions have to be
taken to safely exhaust the fumes. Furthermore a sufficient ventilation
has to be provided for.
Never shut the exhaust gas outlet on top of the machine. Never stoop over
this aperture and never reach into it. Emerging gases are extremely hot!
Do not jam the trigger of the gun during operation!
When carrying through service and maitenance tasks the machine has to
be cut off the power supply system. Put main switch to "0" and pull plug
out of socket.
Never operate the machine if cables or other safety-relevant parts (e.g.
excess pressure valve, high-pressure hose, spraying devices, etc.) are
defective.
General rules
Safety notes