EN Operating manual High-pressure cleaner quadro 599 TST quadro 799 TST quadro 899 TST www.kraenzle.
Operating manual EN High-pressure cleaner quadro 599 TST quadro 799 TST quadro 899 TST Operating manual! This manual is a translation of the original manual. Read and conform safety instructions before use! Technical data will be found in the Spare parts list. Please be aware that the spare part list is part of the operating manual. Keep both leaflets for later use or any subsequent owners.
Contents Dear customer: We would like to congratulate you on the purchase of your new high-pressure cleaner and thank you for your confidence in our products! Explanatory symbols Explanatory symbols used in the operating manual Failure to observe this note may entail environmental damage. Your choice has fallen on an absolute quality product! Kränzle high-pressure cleaners are characterized by their convenient and compact design as well as their high suitability for everyday use.
Safety notes User operating the high-pressure cleaner should wear the necessary protective clothing, i.e. waterproof clothing, rubber boots, safety goggles, ear protection headwear etc. It is prohibited to use the high-pressure cleaner in close vicinity to people lacking suitable protective clothing. Use of high-pressure cleaners may result in aerosols being generated. An aerosol is a mixture of floating solid or liquid particles in a gas. Inhaling aerosol particles may cause damage to health.
Safety notes - This is prohibited! Safety notes - This is prohibited! Never direct the high-pressure jet at the highpressure cleaner itself! The high-pressure cleaner may not be placed within reach of the highpressure jet spray mist! Never direct the high-pressure jet at people or animals! Never direct the high-pressure jet at yourself or other persons, not even to clean clothing or shoes.
Description of high-pressure cleaner Description of high-pressure cleaner This is what you have purchased: Design: The quadro 599 TST, quadro 799 TST, quadro 899 TST cleaner is a mobile highpressure cleaner with an advanced arrangement system. Please see construction scheme for more details. 1. Ergonomically shaped handle 2. Pump head made of special brass 9 3. Hose drum with 20 m steel fabric high-pressure hose. For quadro 899 TST with 15 m steel fabric high-pressure hose. 1.
General rules Intended use This high-pressure cleaner is to be used solely for high-pressure water jet cleaning applications without detergents or low-pressure cleaning work with detergents (e.g. with a foam injector or washing brush). General rules Oil change The first oil change should be carried out after approximately 50 operating hours, then every year or after 250 operating hours. If the oil turns grey or white, you must change the oil.
Functional details Functional details Please note: Lack of water Insufficient quantity of electricity Lack of water occurs more often than you probably believe. The more powerful a highpressure cleaner is the greater is the danger that a lack of water occurs. If there is only an insufficient amount of water available, cavitation (water-gas mixture) arises inside the high-pressure pump, which is normally noticed too late or even not at all. The highpressure pump will be destroyed.
Functional details Functional details Water and cleaning system Pressure control valve/safety valve Water can be connected at mains pressure to the high-pressure pump. A float valve in the water tank regulates the water inlet. Then, the water is sucked by the high-pressure pump from the water tank and supplied to the lance under pressure. The high-pressure jet is formed by the nozzle at the end of the lance.
Functional details Safety shutdown Putting into operation 1. For moving the high-pressure cleaner to the place of use, please release locking break. The high-pressure cleaner must not be pulled with connected water supply hose! 2. The medium quadro series is a movable high-pressure cleaner with sturdy trolleys ideally suited for difficult terrain.
Putting into operation Putting into operation 3. Release fixation of hose drum. Unwind high-pressure hose straight and without nooses. Completely unwind hose. The high-pressure hose may leave signs of abrasion on some floors. Alternatively, please also find non-marking high-pressure hoses in our range. 4. Mount the grey rotating screw connection of the high-pressure hose onto the trigger gun incorporating a safety catch. Afterwards screw together ensuring a snug and pressure-tight fit. 5.
Putting into operation Direct suction 10. Connect to circuit (see technical data). Direct water extraction Due to the suction capacity of its high-pressure pump (up to 2.5 m suction height, max. hose length 3 m) this high-pressure cleaner can suck in water for cleaning purposes from separate containers or ponds. In this case the water tank must be bypassed. Do not touch the mains plug or any live parts with wet or moist hands. 11. Switch on high-pressure cleaner with opened safety trigger gun.
Applying additives Taking out of operation Suction of additives 1. Switch off the high-pressure cleaner Due to the water tank fitted to the medium quadro series it is now possible to directly suck the detergent into the high-pressure pump thus reducing output loss and increasing the efficiency considerably. 2. Cut off the water supply 3. Open the safety trigger gun catch briefly until the pressure is released 1. Place chemicals filter into container with additives 4.
Small repairs - do it yourself Small repairs - do it yourself Problem Problem Cause Cause No water from nozzle although the high-pressure cleaner is running. The stainless steel pressure gauge shows full pressure. Most likely the nozzle is blocked. Irregular jet from nozzle. The stainless steel pressure gauge shows low pressure. Most likely the valves are soiled or sticky. The stainless steel pressure gauge shows full pressure, but from the nozzle comes only little water or no water at all.
Small repairs - do it yourself Small repairs - do it yourself Problem Problem Possible cause No. 1 Possible cause No. 2 After closing the safety trigger gun the high-pressure cleaner keeps switching on and off. The stainless steel pressure gauge continuously displays full pressure. Leckage. After closing the safety trigger gun the high-pressure cleaner keeps switching on and off. The stainless steel pressure gauge continuously displays full pressure. The non-return valve is defective.
Kränzle accessories Kränzle accessories Rotating washing brush Stainless steel pipe 1000 mm Brush head ∅ 180 mm Nozzle size 3.2 mm With anti-twist protection With plug-in nipple Item no.: 410507 Floor washer Round Cleaner INOX 520 From stainless steel Nozzle system 06 With plug-in nipple ∅ 520 mm Item no.: 41812 Underbody lance Stainless steel pipe 1000 mm Nozzle system 4007 With anti-twist protection With plug-in nipple Item no.
EU Declaration of Conformity Warranty We here by declare that the design of quadro 599 TST the high-pressure cleaners: quadro 799 TST quadro 899 TST Nominal flow: quadro 599 TST: 600 l/h quadro 799 TST: 780 l/h quadro 899 TST: 900 l/h technical specifications available from: Fa. Josef Kränzle GmbH & Co. KG Manfred Bauer Rudolf-Diesel-Str.
Inspection reports Inspection reports High-pressure cleaners for industrial use have to be checked by an expert every 12 months! Inspection report on annually carried out Labour Safety Inspection (UVV) according to the Guidelines for Liquid Spray Equipment.
sales@kraenzle.com © Kränzle 09.03.2021 / Ord. no.: 306000 / Subject to technical modifications and errors. Josef Kränzle GmbH & Co. KG Rudolf-Diesel-Straße 20 89257 Illertissen (Germany) Made in Germany www.kraenzle.
