Manual

Safety notes
15
Frost protection
Normally after operation, there is still some water in the device. Thus, you must take
special measures to protect the device from frost.
- Completely drain the device
For this purpose, separate the device from the water supply. Then, turn on the
main switch and open the gun. Now, the pump presses the remaining water from
the water tank and the pump. However, do not allow the device to operate without
water for longer than one minute.
- Fill the device with antifreeze agent
If the device is not operated for longer periods, especially over the winter, you
should pump an antifreeze agent through the device. For this purpose, ll the anti
freeze agent into the water box and turn on the device. Wait with opened gun,
until the agent comes from the nozzle.
However, the best way to protect the device from frost is
to store it at a frost-free location.
As to the recoil -
see notice on page 2!
Apply the safety catch on the spray
gun after each use, in order to prevent
unintentional spraying!