Manual

4. The machine can be connected to a
pressurised water line with 60°C hot
water (see page 2).
Ensure that the water supply is clean
when sucking from external sources.
The hose cross section must be at least
1/2“ = 12.7 mm (free passage). Filter 1
must always be clean.
Please make sure that
the lter is clean before
using your high pressure cleaner.
CAUTION !
When running your high pressure cleaner with hot water of
60° C raised temperatures occur.
Do not touch the pump without safety gloves!
Water
5. Maximum induction height 1.0 m
(only HD 7/122)
see technical
data on page 2
Preparation for use
12