Manual

26 27
We here by declare that the design of
the high pressure cleaners:
Nominal flow:
technical specifications available
from:
comply with the following guidelines
and their amendments for high
pressure cleaners:
Noise pressure level, typical:
Noise pressure level, guaranteed:
Applied conformity assessment
procedure:
Applied specifications and standards:
K 1050 TS
K 1050 TST
450 l/h
Fa. Josef Kränzle GmbH & Co. KG
Manfred Bauer
Rudolf-Diesel-Str. 20, 89257 Illertissen
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
ROHS Directive 2011/65/EU
Outdoor Directive 2000/14/EC
84 dB (A)
86 dB (A)
Annex V, Outdoor Directive
2000/14/EC
EN 60335–1:2012/A13:2017
EN 60335–2–79:2012
EN 62233: 2008
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 61000–3–2: 2014
EN 61000–3–3: 2013
Small repairs - do it yourself EU Declaration of Conformity
Proceeding:
Switch off the high pressure cleaner
and pull plug from socket. Stop water
supply. Operate safety trigger gun
catch several times to decrease the
pressure. Unscrew pump outlet.
There is no guarantee if the high pressure pump is damaged by
defective O-rings due to air induction or lack of water (cavitation).
Remove check body and check O-Ring
for soiling or damage. Also check seal
seat inside pump housing for soiling
or damage.
If sealing rings are defective replace
O-rings at once.
Problem
After closing the safety trigger gun the high pressure cleaner
keeps switching on and off.
Possible cause No. 2
The non-return valve is defective.
Ludwig Kränzle
(Managing director)
Josef Kränzle GmbH & Co. KG
Rudolf-Diesel-Straße 20
89257 Illertissen (Germany)
Illertissen, 2019-04-05
TS TST
TS TST
TS TST