EN Operating manual High-pressure cleaner K 1050 P www.kraenzle.
Operating manual EN High-pressure cleaner K 1050 P Operating manual! This manual is a translation of the original manual. Read and conform safety instructions before use! Technical data will be found in the Spare parts list. Please be aware that the spare part list is part of the operating manual. Keep both leaflets for later use or any subsequent owners.
Contents Dear customer: We would like to congratulate you on the purchase of your new high pressure cleaner and thank you for your confidence in our products! Your choice has fallen on an absolute quality product! Kränzle high pressure cleaners are characterized by their convenient and compact design as well as their high suitability for everyday use.
Safety notes User operating the high-pressure cleaner should wear the necessary protective clothing, i.e. waterproof clothing, rubber boots, safety goggles, ear protection headwear etc. It is prohibited to use the high-pressure cleaner in close vicinity to people lacking suitable protective clothing. Use of high-pressure cleaners may result in aerosols being generated. An aerosol is a mixture of floating solid or liquid particles in a gas. Inhaling aerosol particles may cause damage to health.
Safety notes - This is prohibited! Description of high pressure cleaner Design Never direct the high pressure jet at power sockets or any other electrical installations! Within the working area, all live parts are to be protected from both water jet and spray mist. The K 1050 P cleaner is a portable high pressure cleaner with an advanced arrangement system. Please see construction scheme for more details.
Description of high pressure cleaner This is what you have purchased General rules Intended use 1. Kränzle high pressure cleaner K 1050 P This high-pressure cleaner is to be used solely for high pressure water jet cleaning applications without detergents or low-pressure cleaning work with detergents (e.g. with a foam injector or washing brush).
Functional details Functional details Please note: Lack of water Insufficient quantity of electricity Lack of water occurs more often than you probably believe. The more powerful a high pressure cleaner is the greater is the danger that a lack of water occurs. If there is only an insufficient amount of water available, cavitation (water-gas mixture) arises inside the high pressure pump, which is normally noticed too late or even not at all. The high pressure pump will be destroyed.
Functional details Functional details Water and cleaning system Motor overload protection Water can be connected at mains pressure to the high pressure pump. The water is then forced under pressure by the high pressure pump to the lance. The high pressure jet is formed by the nozzle at the end of the lance. Motor is protected against overload by means of a motor protection switch. In case of motor overload or blocking, the motor of the high pressure cleaner switches off automatically.
Putting into operation Putting into operation 1. Carry the K 1050 P to its place of operation. When parking the high pressure cleaner make sure that the four rubber buffers stand on a safe support. The high pressure hose may leave signs of abrasion on some floors. Alternatively, please also find non-marking high pressure hoses in our range. 4. Tightly screw together high pressure hose and safety trigger gun. 5.
Putting into operation Putting into operation 7. Check water inlet filter for cleanliness prior to putting the high pressure cleaner into operation. When inside filter is contaminated, remove filter and follow step 7.1. If the sieve is dirty, water cannot get through and pressure will not build up. 7.1 If contaminated, remove the filter and thoroughly rinse it with clear water and clean it with the other parts. Check the water inlet sieve for damage.
Taking out of operation Small repairs - do it yourself 1. Switch off the high pressure cleaner 2. Cut off the water supply No water from nozzle although the high pressure cleaner is running. 3. Open the safety trigger gun catch briefly until the pressure is released Cause 4. Apply safety catch on the trigger gun 5. Remove high pressure hose and safety trigger gun 6. Emptying high pressure pump: Hold high pressure hose and switch motor on until water jet stops escaping at the outlet. 7.
Small repairs - do it yourself Small repairs - do it yourself Problem Problem Irregular jet from nozzle. After closing the safety trigger gun the high pressure cleaner keeps switching on and off. Cause Most likely the valves are soiled or sticky. The water from the lance comes in squirts. The high pressure hose vibrates.
Small repairs - do it yourself EU Declaration of Conformity Problem After closing the safety trigger gun the high pressure cleaner keeps switching on and off. Possible cause No. 2 The non-return valve is defective. Proceeding: Switch off the high pressure cleaner and pull plug from socket. Stop water supply. Operate safety trigger gun catch several times to decrease the pressure. Unscrew pump outlet.
Kränzle accessories Kränzle accessories Rotating washing brush BRUSH light 210 mm Stainless steel extension Brush head ∅ 180 mm Nozzle size 2.5 mm Item no.: 12800 Floor washer Round Cleaner UFO light ∅ 260 mm Nozzle system 03 Item no.: 41870 Foam injector light With container Nozzle system 03 1 litre Item no.: 135302 2 litre Item no.: 135312 The high pressure cleaner accessories are safety components! Any warranty will be void if parts not authorised by Kränzle are used.
Warranty Notes This Kränzle high-pressure cleaner is solely designed for home users for typical applications around the house and garden (for cleaning façades, patios, garden equipment, tools, vehicles and machinery as well as building structures). It is not intended for commercial use. The warranty obligation of Josef Kränzle GmbH & Co.
Notes 30 Notes 31
sales@kraenzle.com © Kränzle 07.06.2019 / Ord. no.: 306100 / Subject to technical modifications and errors. Josef Kränzle GmbH & Co. KG Rudolf-Diesel-Straße 20 89257 Illertissen (Germany) Made in Germany www.kraenzle.
