Spec Sheet
WP-580T
4K60 4:2:0 HDMI Wall−Plate Transmitter
over Long−Reach HDBaseT
|HDMI |HDCPCompliant |HDBaseT
|4K/60UHD(4:2:0)
The WP−580T is a high−performance, HDBaseT
twisted pair wall plate transmitter for 4K@60Hz (4:2:0)
HDMI signals. The WP−580T inputs the signals and
converts them into an HDBaseT twisted pair signal
that it transmits to a WP−580R receiver. The
WP–580T(D) model is supplied with a Midway Size 2
gang DECORA® design frame
FEATURES
Max. Data Rate-10.2Gbps (3.4Gbps per graphic channel)
HDTV Compatible
HDCP 2.2 Compliance
HDBaseT™ Technology
HDMI Support-Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS−HD, CEC
3D Pass-Through
EDID PassThru-Passes EDID signals between the source and display
2K & 4K Support
System Range-Up to 70m (230ft)
Cable-For optimum range and performance using HDBaseT™, use Kramer's BC−HDKat6a cable.
Note that the transmission range depends on the signal resolution, source and display used. The
distance using non−Kramer CAT 6 cable may not reach these ranges
Indicators-Status LEDs for input, output, link and power
Dimensions-12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x
1.17" x 3.39"), 15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H)